Humbucker Pickup Ring (Spectrum II Sp5112)
3 posters
Page 1 of 1
Humbucker Pickup Ring (Spectrum II Sp5112)
Has anyone seen a standard black pickup ring in the wild for these guitars? Their unique "3 Bolt" is proving difficult to find a replacement for.
The one on the guitar is cracked in half, which i assume is due to age/hit/or cheap plastic.
I double checked the pickup ring from my WE2500 and it seems to fit just the same.
Any direction would be appreciated!
The one on the guitar is cracked in half, which i assume is due to age/hit/or cheap plastic.
I double checked the pickup ring from my WE2500 and it seems to fit just the same.
Any direction would be appreciated!
Myrixspecture- Newbie
- Number of posts : 1
Registration date : 2022-01-27
Re: Humbucker Pickup Ring (Spectrum II Sp5112)
I don't know of any direct replacement off hand, perhaps another member has some better info.
Meantime, if the plastic is simply cracked (not rotted) it should be repairable with cyanoacrylate glue. I'd recommend stabilizing/bridging the crack (inside) with something suitable like a toothpick first, then sealing the crack.
Sand with a fine grit paper to smooth and even it out. If it's a cream colour you may still see a line but it should be solid and usable afterwards. Black can be touched up with a black marker pen.
Meantime, if the plastic is simply cracked (not rotted) it should be repairable with cyanoacrylate glue. I'd recommend stabilizing/bridging the crack (inside) with something suitable like a toothpick first, then sealing the crack.
Sand with a fine grit paper to smooth and even it out. If it's a cream colour you may still see a line but it should be solid and usable afterwards. Black can be touched up with a black marker pen.
_________________
"A little song. A little dance. A little seltzer down your pants." -Chuckles the Clown
GUITARS : https://legend.barryeames.com
MUSIC/PIX/VIDEOS: https://getback.barryeames.com (including Spectrum ST)
Re: Humbucker Pickup Ring (Spectrum II Sp5112)
Like this?Barry wrote:I don't know of any direct replacement off hand, perhaps another member has some better info.
Meantime, if the plastic is simply cracked (not rotted) it should be repairable with cyanoacrylate glue. I'd recommend stabilizing/bridging the crack (inside) with something suitable like a toothpick first, then sealing the crack.
Sand with a fine grit paper to smooth and even it out. If it's a cream colour you may still see a line but it should be solid and usable afterwards. Black can be touched up with a black marker pen.
AriaProII- Registered Member
- Number of posts : 15
Registration date : 2021-06-21
Re: Humbucker Pickup Ring (Spectrum II Sp5112)
Yup!
_________________
"A little song. A little dance. A little seltzer down your pants." -Chuckles the Clown
GUITARS : https://legend.barryeames.com
MUSIC/PIX/VIDEOS: https://getback.barryeames.com (including Spectrum ST)
Similar topics
» WTB: HB Pickup ring for series ii sp5112
» pickup ring...
» bridge pickup mounting ring
» Pickup specs for session II humbucker
» looking for a westone thunder 1 guitar bridge pickup humbucker #45
» pickup ring...
» bridge pickup mounting ring
» Pickup specs for session II humbucker
» looking for a westone thunder 1 guitar bridge pickup humbucker #45
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|