The · W e s t o n e · Forums
Would you like to react to this message? Create an account in a few clicks or log in to continue.

Westone guitar neck plate pic

2 posters

Go down

Westone guitar neck plate pic Empty Westone guitar neck plate pic

Post by knicelyr Wed Aug 07, 2019 1:28 pm

Would anyone be willing to take a picture of their Westone guitar neck plate in hi resolution?
I am going to make one out of stainless and have it laser etched.
My old one is beat up and I can't get a picture that is good enough to use in Photoshop/illustrator.

I cant find a font that I like for the writing under the Westone logo.

I found one that is close, but it is not squared in the pic.

Mine is a Dynasty so a Dynasty would be preferred.

Thank you,
Rick
knicelyr
knicelyr
Senior Member

Number of posts : 274
Age : 57
Location : Michigan
Registration date : 2019-04-01

Back to top Go down

Westone guitar neck plate pic Empty Re: Westone guitar neck plate pic

Post by edwardd Tue Sep 24, 2019 6:56 pm

Hi Rick,

I am unfamiliar with Dynasty guitars, do you mean the metal back plate for reinforcing the neck joint? I can try to take a hi-res picture of my Thunder 1A rear neck-plate if it's of any use, here's a quick snapshot:

https://www.dropbox.com/s/1v4u3xqlwaveau6/WNP1.jpg?dl=0


I also have a logo which I created for my Thunder 1A a few years back when I refinished the guitar.




It's pretty much the same as the logo on this forum with the bird and joined-up 'Westone' underneath and is in Coreldraw vector format which I can export to several oher file types if needed.




If you, or other forum members would like the vector logo, please let me know and I'll try to add a link to dropbox in preferred format(s).

Edit: Sorry I have crossed out the above as I don't know if it would infringe a copyright.

Regards,
Ed.
avatar
edwardd
Westone Nut

Number of posts : 24
Registration date : 2011-06-13

Back to top Go down

Westone guitar neck plate pic Empty Re: Westone guitar neck plate pic

Post by knicelyr Tue Sep 24, 2019 8:39 pm

I don’t thing there would be any infringement...
But I’d you have the logo that would be great because I can laser etch it in the future.

I would really like the graphic for the bottom writing, “made in Japan” etc.

Westbone sent me a plate for my dynasty so I’m all set but I want to be able to make all the little bits possible...

I have another Dynasty restoration to do and crazy I know, I want to build one from scratch....
knicelyr
knicelyr
Senior Member

Number of posts : 274
Age : 57
Location : Michigan
Registration date : 2019-04-01

Back to top Go down

Westone guitar neck plate pic Empty Re: Westone guitar neck plate pic

Post by edwardd Wed Sep 25, 2019 2:01 pm


  • Logo in PDF format,
  • Logo in CorelDraw format.
  • Neck plate photo in jpg format (warning 52MB).


Hope the above can help to get you started. Please let me know if you need anything converted.

regards,
Ed.
avatar
edwardd
Westone Nut

Number of posts : 24
Registration date : 2011-06-13

Back to top Go down

Westone guitar neck plate pic Empty Re: Westone guitar neck plate pic

Post by knicelyr Thu Sep 26, 2019 9:49 am

Ed,
Thank you and yes Smile I will be able to use those to help put together a graphic to laser etch neck plates with Smile

Thank you!
knicelyr
knicelyr
Senior Member

Number of posts : 274
Age : 57
Location : Michigan
Registration date : 2019-04-01

Back to top Go down

Westone guitar neck plate pic Empty Re: Westone guitar neck plate pic

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum