Westone Pantera parts needed!
4 posters
Page 1 of 1
Westone Pantera parts needed!
Hello, looking for any parts for the Westone Pantera X275, preferably tuning pegs and the bendmaster FT unit (With the tremolo arm and added parts). If possible, the colour black would be the most preferred for all items! Thank ya'!
Senzuri- Registered Member
- Number of posts : 11
Registration date : 2017-10-18
Re: Westone Pantera parts needed!
The machine heads are still available from Gotoh, albeit without the Westone logo!
The FT bridge is a whole new level of frustration; there's not many about at all, and you need the stringlock as well, unless you retrofit a locking nut.
The FT bridge is a whole new level of frustration; there's not many about at all, and you need the stringlock as well, unless you retrofit a locking nut.
corsair- Senior Member
- Number of posts : 6352
Age : 65
Location : Mount Hunter, NSW, Australia
Registration date : 2008-04-08
Re: Westone Pantera parts needed!
I have the stringlocks, they seem to be in working order, albeit just a tad dirty. I'll check out the machine heads from Gotoh!
Senzuri- Registered Member
- Number of posts : 11
Registration date : 2017-10-18
Re: Westone Pantera parts needed!
are you sure you need a Bendmaster FT?
my Pantera X275 guitars all have the Bendmaster Deluxe tremolo
my Pantera X275 guitars all have the Bendmaster Deluxe tremolo
gittarasaurus- Financial supporter
- Number of posts : 1523
Location : San Francisco, CA
Registration date : 2011-05-25
Re: Westone Pantera parts needed!
Oh, I seem to have gotten them mixed up! I did mean the Bendmaster Deluxe, not the FT!
Senzuri- Registered Member
- Number of posts : 11
Registration date : 2017-10-18
Re: Westone Pantera parts needed!
Ah, well... I have a couple of Deluxes in my spares box, one of which may even be black - I'll have to check. From memory they are complete, except for the bar, which is available as "Bar, 6mm, for imports" at Stewmac.
corsair- Senior Member
- Number of posts : 6352
Age : 65
Location : Mount Hunter, NSW, Australia
Registration date : 2008-04-08
Re: Westone Pantera parts needed!
some of the X275's did come with a Bendmaster FT.
there is a black X275 for sale on ebay right now with the FT bridge. >ebay<
there is a black X275 for sale on ebay right now with the FT bridge. >ebay<
gittarasaurus- Financial supporter
- Number of posts : 1523
Location : San Francisco, CA
Registration date : 2011-05-25
Re: Westone Pantera parts needed!
gittarasaurus wrote:
there is a black X275 for sale on ebay right now with the FT bridge. >ebay<
Look at the bridge pickup on that one.
You can see it's a crappy UBC pickup by the skinny winds on it. Look at the tape it's sagging, sad...
Re: Westone Pantera parts needed!
I had my eye on that one before I picked up a Pale Yellow one off eBay, the pickups sound good, but just want to make sure I have some spare components!
Also, do let me know if you have a black one, Corsair! I'm just glad I finally have a method of getting some westone parts.
Also, do let me know if you have a black one, Corsair! I'm just glad I finally have a method of getting some westone parts.
Senzuri- Registered Member
- Number of posts : 11
Registration date : 2017-10-18
Re: Westone Pantera parts needed!
There was a set of Black Westone Gotoh Tuners on Ebay last week and Chrome as well...
Guest- Guest
Similar topics
» Needed: Parts for Dynasty
» Pantera x-275 parts needed
» Westone XA1630 Parts Needed
» Westone spectrum lx ( 198 ) parts NEEDED!
» Fixing up a Corsair
» Pantera x-275 parts needed
» Westone XA1630 Parts Needed
» Westone spectrum lx ( 198 ) parts NEEDED!
» Fixing up a Corsair
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum