X275 Locking Nut Needed
2 posters
Page 1 of 1
X275 Locking Nut Needed
Trying to restore my x275 and need the original locking but for the tremolo - any help appreciated!! See picture
Rushman- Registered Member
- Number of posts : 3
Registration date : 2023-01-13
Re: X275 Locking Nut Needed
Hi Rushman and welcome.
Sorry, as an anti-spam measure, new members are restricted from posting hyperlinks for 7 days.
I don't have any first hand experience with this model but if I understand your problem correctly, it has a Bendmaster tremolo and you can fix it by following this repair post on our website from Forum member Westbone.:
LINK
The chances of finding an original part are about as slim as finding rocking horse poo.
Good luck with your resto!
Sorry, as an anti-spam measure, new members are restricted from posting hyperlinks for 7 days.
I don't have any first hand experience with this model but if I understand your problem correctly, it has a Bendmaster tremolo and you can fix it by following this repair post on our website from Forum member Westbone.:
LINK
The chances of finding an original part are about as slim as finding rocking horse poo.
Good luck with your resto!
Last edited by Barry on Sun Jan 15, 2023 2:12 pm; edited 1 time in total
_________________
"A little song. A little dance. A little seltzer down your pants." -Chuckles the Clown
GUITARS : https://legend.barryeames.com
MUSIC/PIX/VIDEOS: https://getback.barryeames.com (including Spectrum ST)
Re: X275 Locking Nut Needed
Hi Barry,
Thanks for the reply - since it sounds like my chances of finding an original locking nut for the Bendmaster Deluxe on my x275 is about as high as seeing Bigfoot in my guitar room, do you have any suggestions for possible substitutes?
Thanks for the reply - since it sounds like my chances of finding an original locking nut for the Bendmaster Deluxe on my x275 is about as high as seeing Bigfoot in my guitar room, do you have any suggestions for possible substitutes?
Rushman- Registered Member
- Number of posts : 3
Registration date : 2023-01-13
Re: X275 Locking Nut Needed
My apologies, I seem to have forgotten to add the link I referenced in my original reply to you!
(It was late, I was half asleep!)
I've added it now and you can follow the fix there.
I doubt if there's anything off the shelf that will do but if you're a little bit handy you can fashion your own replacement.
(It was late, I was half asleep!)
I've added it now and you can follow the fix there.
I doubt if there's anything off the shelf that will do but if you're a little bit handy you can fashion your own replacement.
_________________
"A little song. A little dance. A little seltzer down your pants." -Chuckles the Clown
GUITARS : https://legend.barryeames.com
MUSIC/PIX/VIDEOS: https://getback.barryeames.com (including Spectrum ST)
Rushman likes this post
Similar topics
» x275 with an interesting locking assembly above the nut
» complete Locking nut needed for Westone Spectrum LX
» and another (not quite as nice) x275 on the bay...
» Pantera X275
» Pantera X275 (CAN)
» complete Locking nut needed for Westone Spectrum LX
» and another (not quite as nice) x275 on the bay...
» Pantera X275
» Pantera X275 (CAN)
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum