Dynasty Project Wiring Help Please

Hello Guys, Well, Its here.  

Along with the PU Surrounds and a Single coil.  BUT What needs soldering where?

Has anyone got any pictures or wiring diagram to help me I'm a novice to such wizardry?

Cheers.

Pix, or it didn't happen....

Proof he says precious!

 
Ooh; looks alright, too, Syd! Are the points munted or OK? Pickups will be on their way today, mate...

With the soldering, just take it slowly and check twice before attaching anything; if I can do it - and I'm the original Blind Freddie - , my friend, then you can, too!

What I do find helpful is to make a cardboard template of the control cavity with the holes for the hardware... put the hardware in the holes - if you have to use the wee nuts to hold 'em there, then that's OK -  then turn the cardboard upside down and work on the soldering that way; makes it a damn sight easier, though there are still wires you have to do in situ like the bridge earth and the output jack, though even that's not too bad as it's mounted on a plastic rectangle.
Don't try to make the wires too short - give yourself plenty to work with; wire's cheap as chips!

Having a bit of an issue with screws for one of the 45's, One set are about the right dia, but only about 15mm long, and another set are about the right length but woefully small. any idea what size I'd need if I try and get some from a hardwear shop?

Which screws, Syd? The mounting screws or height adjustment screws?

corsair wrote:Which screws, Syd? The mounting screws or height adjustment screws?

Height adjustment ones pal.  Hoping I can get x size machine screws to do the job as 3 different packs from Allparts didn't didn't do the job

Height screws are 2.5 mm

https://www.ebay.co.uk/itm/8-Pcs-M2-5x32MM-Electric-Guitar-Humbucker-Pickups-Adjust-Height-Screw-and-S-B8N6/223086804295?epid=15022159227&hash=item33f1027d47maxzaore9pmx6yG00TsiJdg

Thanks Westbone