Thunder 2 bass distortion
3 posters
Page 1 of 1
Thunder 2 bass distortion
Hi everyone.
I've just discovered an odd problem, my bass is distorting at any volume via the neck pickup, have tried other basses and it's just this one.
it almost sounds like a distortion pedal.
the bridge pick up is fine, (both pick ups are humbuckers non modified Thunder 2) it's a 1984
any ideas or advice will be appreciated.
ps, with both pick ups selected it is still audible, just not so bad.
and, it didn't do it a last time I played it, and I have no batteries as I don't ever use the actives.
???
I've just discovered an odd problem, my bass is distorting at any volume via the neck pickup, have tried other basses and it's just this one.
it almost sounds like a distortion pedal.
the bridge pick up is fine, (both pick ups are humbuckers non modified Thunder 2) it's a 1984
any ideas or advice will be appreciated.
ps, with both pick ups selected it is still audible, just not so bad.
and, it didn't do it a last time I played it, and I have no batteries as I don't ever use the actives.
???
Last edited by Clive Shakedown on Sun Mar 22, 2015 12:25 pm; edited 2 times in total (Reason for editing : more detail)
Clive Shakedown- Senior Member
- Number of posts : 134
Age : 64
Location : UK
Registration date : 2013-07-28
Re: Thunder 2 bass distortion
Hi mate, hope you are well.
Only thing I can think of would be the neck volume pot....check the solder joints or failing that might be a faulty pot.
Let us know how you get on
Only thing I can think of would be the neck volume pot....check the solder joints or failing that might be a faulty pot.
Let us know how you get on
Catalyst- Financial supporter
- Number of posts : 319
Registration date : 2013-02-24
Re: Thunder 2 bass distortion
Hiya, yes fine thanks, only one volume control on the bass, just spent nearly an hour taking out the pick up selector switch and servisol ling it, is that a word?
but still the same, all wires attached.
not a serious problem as have more Thunders, just annoying that it's below par at the moment.
Good suggestion, will take a look at the pots.
Cheers.
but still the same, all wires attached.
not a serious problem as have more Thunders, just annoying that it's below par at the moment.
Good suggestion, will take a look at the pots.
Cheers.
Clive Shakedown- Senior Member
- Number of posts : 134
Age : 64
Location : UK
Registration date : 2013-07-28
Re: Thunder 2 bass distortion
Yeah, Cat's got the right idea. Usually a simple cleaning will correct it.
Many weird and wonderful sounds have been caused by a bit o' corrosion on a pot's wiper. Sometimes no sound at all. Common electrical problem especially on an older instrument.
Squirt liberally. Then yank it like a monkey in a Mango tree.
Many weird and wonderful sounds have been caused by a bit o' corrosion on a pot's wiper. Sometimes no sound at all. Common electrical problem especially on an older instrument.
Squirt liberally. Then yank it like a monkey in a Mango tree.
_________________
"A little song. A little dance. A little seltzer down your pants." -Chuckles the Clown
GUITARS : https://legend.barryeames.com
MUSIC/PIX/VIDEOS: https://getback.barryeames.com (including Spectrum ST)
Re: Thunder 2 bass distortion
Thanks guys. Will give it a try.
Clive Shakedown- Senior Member
- Number of posts : 134
Age : 64
Location : UK
Registration date : 2013-07-28
Re: Thunder 2 bass distortion
Dry solder joints it was. Sorted now. Thanks for your help.
Clive Shakedown- Senior Member
- Number of posts : 134
Age : 64
Location : UK
Registration date : 2013-07-28
Similar topics
» Thunder 2 bass distortion revisited
» Distortion from my Thunder 1A pickups
» Westone Thunder 1 Guitar + Thunder 1A bass (UK Ebay)
» Westone Thunder ll Bass. Thunder 2.
» Thunder I Bass
» Distortion from my Thunder 1A pickups
» Westone Thunder 1 Guitar + Thunder 1A bass (UK Ebay)
» Westone Thunder ll Bass. Thunder 2.
» Thunder I Bass
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum