Concord I truss ross question
3 posters
Page 1 of 1
Concord I truss ross question
Hi, I'm new to the forum and I recently bought a Concord I with the truss rod adjustment at the base of the neck. I can't get a regular allen key in the small hole in the pick guard but I've discovered that such a thing as a 'stubby' allen key exists with a shorter length that will hopefully fit in there.
I'm hoping someone can please tell me what size key fits the Concord as I don't want to order a whole set.
I will post pix of the guitar (and my old Thunder II-A that I've had since about 1983) in the near future.
Thanks.
I'm hoping someone can please tell me what size key fits the Concord as I don't want to order a whole set.
I will post pix of the guitar (and my old Thunder II-A that I've had since about 1983) in the near future.
Thanks.
BC Witch- Registered Member
- Number of posts : 11
Location : London, UK
Registration date : 2014-08-18
Re: Concord I truss ross question
5mm.
Here's an original one.
Could just take a normal type(long) and grind it down.
Here's an original one.
Could just take a normal type(long) and grind it down.
Re: Concord I truss ross question
Yep, this is what I did, 2 minutes with a dremel cutting wheel to lop off the end.Westbone wrote:Could just take a normal type(long) and grind it down.
Sgt. Vimes- Financial supporter
- Number of posts : 3322
Age : 53
Location : tyneside
Registration date : 2011-11-03
Re: Concord I truss ross question
Thanks very much for the info!
BC Witch- Registered Member
- Number of posts : 11
Location : London, UK
Registration date : 2014-08-18
Re: Concord I truss ross question
Of course, I'd do the same thing....with an angle grinder, 2 seconds with laser beam...Sgt. Vimes wrote:Yep, this is what I did, 2 minutes with a dremel cutting wheel to lop off the end.Westbone wrote:Could just take a normal type(long) and grind it down.
Re: Concord I truss ross question
10 seconds wiv yer teef? Get that on film mate!
Sgt. Vimes- Financial supporter
- Number of posts : 3322
Age : 53
Location : tyneside
Registration date : 2011-11-03
Similar topics
» Next silly question - truss rod adjustment - but not straight forward.
» Raider truss rod nut
» Seized Truss Rod Nut
» Spectrum DX Truss Rod.
» Truss rod adjustment
» Raider truss rod nut
» Seized Truss Rod Nut
» Spectrum DX Truss Rod.
» Truss rod adjustment
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|