Need help with wiring MMK53s

Hi Everybody,
I got a Paduak II at a garage sale that has two MMK53s in it. The tone controls were gone and all the wiring was globbed on the volume control. I am going to try to put it back to being 1 volume, 2 tones and a 3-way pickup selector. The MMK53s have a red wire, a white wire, and a ground. All the diagrams I find show 4 wire humbuckers and I don't know how it is done with the wiring that I have. If anybody could help me, it would be greatly appreciated.
Thanks,
Bruno

the white wire is humbucker output

the red wire is the center connection between the humbucker's coils.
the red lead is connected to ground by a switch for coil tap to make it single coil output. if you do not want to use a coil tap option, simply insulate the ends of the red wires and leave unconnected.

shield wire is ground

a cheap, simple multimeter is very helpful to verify the coil connections on your pickups

Here is a wiring diagram you can use for one volume and 2 tones with 3-way switch

oh, and BTW, we love pictures...

Thanks gittarasaurus for the info. Is the MMK53s considered a good sound for single coil option?
Thanks,
Bruno