The · W e s t o n e · Forums
Would you like to react to this message? Create an account in a few clicks or log in to continue.

Active switch question

2 posters

Go down

switch - Active switch question Empty Active switch question

Post by Pogle Tue Dec 06, 2011 3:56 pm

Hello
Just curious. I have a Thunder 1A v3 guitar and have learnt from reading, from being told and from plain experience that you need to take the jack out when not in use to preserve the batteries. My question is couldn't it have been designed so that the active switch 'off' position isolates the batteries? I'm not much cop with electronics but on the face of it you'd think it'd be possible, with the advantage that there's no battery drain while playing without active, and of course when you forget to take the jack out. Has anyone mod'ed their circuits to do this or is there a good reason why not to or why it can't be done?
Maybe it requires a switch with two circuit breakers or something. If you know, please explain.
avatar
Pogle
Registered Member

Number of posts : 3
Registration date : 2011-12-05

Back to top Go down

switch - Active switch question Empty Re: Active switch question

Post by Westbone Tue Dec 06, 2011 5:56 pm

You can't use the active on/off switch.
Could fit another switch somewhere.
But you have one, take the lead out you lazy sod. Laughing
Westbone
Westbone
Financial supporter

Number of posts : 5918
Location : Redbridge
Registration date : 2008-12-28

http://www.chruler.com/

Back to top Go down

switch - Active switch question Empty Re: Active switch question

Post by Pogle Tue Dec 06, 2011 6:12 pm

Westbone wrote:...take the lead out you lazy sod.
I'm not a lazy sod Sad
...well OK, I am actually. But also a forgetful sod.

It just seems more logical to me that the active switch should cut the battery. Although to be honest if there were a way to do it I'd probably be too lazy to do it.
Case closed.
avatar
Pogle
Registered Member

Number of posts : 3
Registration date : 2011-12-05

Back to top Go down

switch - Active switch question Empty Re: Active switch question

Post by Westbone Wed Dec 07, 2011 6:12 am

Pogle wrote:
Westbone wrote:...take the lead out you lazy sod.
I'm not a lazy sod Sad
...well OK, I am actually. But also a forgetful sod.

It just seems more logical to me that the active switch should cut the battery. Although to be honest if there were a way to do it I'd probably be too lazy to do it.
Case closed.

lol!

All the active switch does is bring in the onboard amp, which is powered by the batteries obviously
http://www.westoneguitars.net/wp-content/uploads/2011/05/Thunder-IIA-version-2-Wiring.jpg
Your jack just completes the circuit.
Westbone
Westbone
Financial supporter

Number of posts : 5918
Location : Redbridge
Registration date : 2008-12-28

http://www.chruler.com/

Back to top Go down

switch - Active switch question Empty Re: Active switch question

Post by Pogle Wed Dec 07, 2011 6:11 pm

Westbone wrote:All the active switch does is bring in the onboard amp, which is powered by the batteries obviously
[snip]not allowed to post links in first seven days :!: [/snip]
Your jack just completes the circuit.
OK. Thanks for the diagram. Maybe what I'm asking could be achieved with a double pole/double throw switch although I suspect the existing switch might already be DPDT, with all poles used. All a bit beyond me, hence the question.

Anyway, I have a workaround which is to place the guitar rack more than a cable length away from the channel input. scratch
avatar
Pogle
Registered Member

Number of posts : 3
Registration date : 2011-12-05

Back to top Go down

switch - Active switch question Empty Re: Active switch question

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum