neck dimension question

Would a Thunder bolt on neck fit in a pantera 300?
I have a strange project in mind where I'm looking to put a neck on an x300 that has the 3x3 tuner setup. I like the Thunder headstock, but have no access to see if they are compatible as a swap for the 300.

If the neck did fit, It would not work as the Pantera 300 is 25 1/2 inch scale and the Thunder is 24 3/4 inch scale (the bolt on version anyway)

I'm not too worries about the scale as this project means getting rid of the trem and putting a fixed bridge on, so I can adjust as needed.
Just looking to see if a 3x3 neck that exisits that would fit a x300 neck pocket.