my problem: with the angled locking nuts when re-stringing the guitar the low E string keeps snapping at the top nut, is this because that top nut washer is old? Part of me thinks its because the angled shape reduces the surface area of washer on string putting more pressure on the string so im looking at changing it.
any help appreciated
- Number of posts : 1
Registration date : 2008-07-23
with a Bendmaster Deluxe trem and locking set up, I'd say you're probably missing the washer-shaped shim that fits under the string on the locking base, but without seeing your guitar and the headstock in some detail can't say for sure!
Post a couple of pix, brother, and we'll see if we can get to the bottom of this...
".... and on the eighth day, God created New Zealanders.
Because even the Australians need heroes"
- Senior Member
- Number of posts : 6259
Age : 61
Location : Mount Hunter, NSW, Australia
Registration date : 2008-04-08
Yes, put some photos up and someone will probably be able to advise you as to what the problem is. In the meantime, you could always check out the spares section at Westone Info.
David sells all the locking nut parts that you might/might not need. It's always a good idea to get some in any case though, you never know when you might need them!
Pauline :flower: :queen: