LTD EC-50 neck screws ...
2 posters
Page 1 of 1
LTD EC-50 neck screws ...
as you may already know, the LTD EC-50 that i have needs a couple of new neck screws. however, the front screws are shorter than the back screws, because of the way the neck plate sits at an angle on the body of about 5 degrees. the front (non-standard) are 40mm long. the back (standard) are 45mm long. and it's the front (non-standard) ones that need replacing. so, my question is: what precisely are these screws?
monkey- Senior Member
- Number of posts : 180
Registration date : 2017-11-08
Re: LTD EC-50 neck screws ...
Suggest you find out here.
Forums - The ESP Guitar Company
https://www.espguitars.com/forums
This is a Westone forum....
Forums - The ESP Guitar Company
https://www.espguitars.com/forums
This is a Westone forum....
Re: LTD EC-50 neck screws ...
the standard screws are used by most manufacturers, including, i imagine, westone. i'd have thought this was a really simple question.
feel free to move this to NON-WESTONE DISCUSSION, if you prefer.
feel free to move this to NON-WESTONE DISCUSSION, if you prefer.
monkey- Senior Member
- Number of posts : 180
Registration date : 2017-11-08
Re: LTD EC-50 neck screws ...
so, from my digging on eBay, it seems that no.8 and M4 are roughly equivalent. i'll guess that these are M4, as whilst the 45mm ones could be 1 3/4", i can't find an imperial equivalent for the 40mm ones.
monkey- Senior Member
- Number of posts : 180
Registration date : 2017-11-08
Re: LTD EC-50 neck screws ...
i'm probably going to go with bolts. as they're shorter anyway, this difference in size between front and back won't matter.
monkey- Senior Member
- Number of posts : 180
Registration date : 2017-11-08
Similar topics
» anyone know the neck heel specs of westone spectrum ST bass? (what can I replace the neck with?)
» Ovation Celebrity CC28 for Repair
» New Bridge & Neck on Westone Spectrum DX - Advice Needed on Neck and Bridge Replacement
» pickguard/cavity plate screws
» Grub screws for Tekglide saddles?
» Ovation Celebrity CC28 for Repair
» New Bridge & Neck on Westone Spectrum DX - Advice Needed on Neck and Bridge Replacement
» pickguard/cavity plate screws
» Grub screws for Tekglide saddles?
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|