Bendmaster Base plate replacement
3 posters
Page 1 of 1
Bendmaster Base plate replacement
AS I have been doing up a Warlock, I have been hanging around the BC Rich forums for tricks and tips. Platinum series BC Rich were often fitted with a Bendmaster. The thing is the BC Rich guys hate it, they pretty much throw them away, so if you were looking for a Bendmaster that might be a good place to go.
Anyhoo, one of them has manufactured a plate that allows you to use the original Bendmaster pivots and spacing with Floyd Rose string guides.
![Bendmaster Base plate replacement 11855510](https://i.servimg.com/u/f84/20/11/82/57/11855510.jpg)
Might be an interesting place to go if anyone is interested in doing that sort of thing.
Anyhoo, one of them has manufactured a plate that allows you to use the original Bendmaster pivots and spacing with Floyd Rose string guides.
![Bendmaster Base plate replacement 11855510](https://i.servimg.com/u/f84/20/11/82/57/11855510.jpg)
Might be an interesting place to go if anyone is interested in doing that sort of thing.
godjira- Registered Member
- Number of posts : 17
Registration date : 2015-11-17
Re: Bendmaster Base plate replacement
Thanks for the tip!
Wonder why there's no love for the Bendmaster.
I haven't experienced any difficulties, but I guess I just don't "bend" enough!
Wonder why there's no love for the Bendmaster.
![scratch](https://2img.net/i/fa/i/smiles/icon_scratch.png)
I haven't experienced any difficulties, but I guess I just don't "bend" enough!
_________________
"A little song. A little dance. A little seltzer down your pants." -Chuckles the Clown
![Bendmaster Base plate replacement Guitar10](https://i.servimg.com/u/f62/19/59/66/02/guitar10.gif)
GUITARS : https://legend.barryeames.com
MUSIC/PIX/VIDEOS: https://getback.barryeames.com (including Spectrum ST)
Re: Bendmaster Base plate replacement
Where do I look for the Bendmaster plate replacement because I have 2 Weston's 65 anniversary guitars made in 1987 and I need this part in a bad way.
Mike MADDOG Drake- Newbie
- Number of posts : 2
Registration date : 2016-03-20
Re: Bendmaster Base plate replacement
on Facebook: B C Rich Junkies page. Guy making them is Dave Cohen I think?. Currently not following as it appears to have degenerated in to a whine fest about whoever the guy that ran BC Rich after Rico died was. Be prepared to see a lot of hair and leopard print.
I would lurk for a bit and see what's going on before asking a question, Let's just say it's not as tolerant as a place like this.
I would lurk for a bit and see what's going on before asking a question, Let's just say it's not as tolerant as a place like this.
godjira- Registered Member
- Number of posts : 17
Registration date : 2015-11-17
Re: Bendmaster Base plate replacement
Maybe Glenn Graff is the man. Dave Cohen is the admin https://www.facebook.com/groups/bcrichjunkies/permalink/3314765071911373
godjira- Registered Member
- Number of posts : 17
Registration date : 2015-11-17
Mike MADDOG Drake likes this post
Re: Bendmaster Base plate replacement
Cool thanks
Mike MADDOG Drake- Newbie
- Number of posts : 2
Registration date : 2016-03-20
![-](https://2img.net/i/empty.gif)
» Bendmaster Deluxe stringlock base.
» Possible FT bridge replacement??
» Westone Bendmaster Deluxe parts wanted...maybe
» bendmaster replacement?
» Bendmaster FT drop-in replacement?
» Possible FT bridge replacement??
» Westone Bendmaster Deluxe parts wanted...maybe
» bendmaster replacement?
» Bendmaster FT drop-in replacement?
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|