Dimensions of a Pantera x350
4 posters
Page 1 of 1
Dimensions of a Pantera x350
Hi,
Could please someone who has an x350 help me out? I'm going to order a case for mine but don't know the exact dimensions of it (over all length, body length, body width and body depth).
Thanks in advance,
Hans
Could please someone who has an x350 help me out? I'm going to order a case for mine but don't know the exact dimensions of it (over all length, body length, body width and body depth).
Thanks in advance,
Hans
Re: Dimensions of a Pantera x350
Be patient
grogg- Financial supporter
- Number of posts : 1094
Location : Cardiff
Registration date : 2008-11-28
Re: Dimensions of a Pantera x350
Be patient
Well, you're right, one option may be to wait for it and then order a case...
However, there is still that distance of 650 km between it and me, and the person that brings it to me will travel by train. As I don't want to take the risks a gigbag would cause, I have to order a case and send it to Berlin. So thanks for the tip, but patience is no option for me.
Re: Dimensions of a Pantera x350
Here you are, Hans...
OAL from headstock tip to belly bottom is 39"
Width at the widest span across the body is 13"
Span across the upper / lower bouts (offset or course) is 11"
The headstock tilts back at about an 18° angle from the nut for a depth of 3".
The OHSC on these (either style) is also right around 3" not taking the lid half into account.
OAL from headstock tip to belly bottom is 39"
Width at the widest span across the body is 13"
Span across the upper / lower bouts (offset or course) is 11"
The headstock tilts back at about an 18° angle from the nut for a depth of 3".
The OHSC on these (either style) is also right around 3" not taking the lid half into account.
Re: Dimensions of a Pantera x350
Not at all Hans. Anything to assist in that x350 getting to you safely.
Re: Dimensions of a Pantera x350
Build one, Hans!! I'm about to set-to and build one for my U-60 and it's not a terribly difficult build at all! 9mm ply, some glue, screws and aluminium corners and a hinge or two and bingo! then get your local foam store cut you a piece of foam or polystyrene for the body shape and you're laughing!
corsair- Senior Member
- Number of posts : 6352
Age : 65
Location : Mount Hunter, NSW, Australia
Registration date : 2008-04-08
Re: Dimensions of a Pantera x350
Well, in fact I plan to do that in the near future. However, I have to write a seminar paper atm, so there's no spare time until I get my baby.
Similar topics
» pantera x350
» looking for a Pantera x350
» Pantera X350
» Incoming Pantera X350
» pantera x390, x350
» looking for a Pantera x350
» Pantera X350
» Incoming Pantera X350
» pantera x390, x350
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum