Stripped Bendmaster sustain block
5 posters
Page 1 of 1
Stripped Bendmaster sustain block
I've searched the forum and found out alot about stripped Bendmaster Deluxe nuts and bridges but couldn't find any info on a stripped sustain block. The 3 screws that go from the top of the bridge stripped out the block so i tried to replace them with longer screws and it seemed fine until the tension of the strings did it again. I'm pretty sure i need to replace the block and i was hoping someone may have come across such a problem. Are they standard? Highly doubt that
. This is for my 87 Spectrum III Bendmaster Deluxe by the way. You can see the angle of the sustain block below. Thanks guys.
![Bendmaster - Stripped Bendmaster sustain block 010-1](https://2img.net/h/i921.photobucket.com/albums/ad52/hobster69/010-1.jpg)
![Bendmaster - Stripped Bendmaster sustain block Icon_razz](https://2img.net/i/fa/i/smiles/icon_razz.gif)
![Bendmaster - Stripped Bendmaster sustain block 010-1](https://2img.net/h/i921.photobucket.com/albums/ad52/hobster69/010-1.jpg)
hobster- Senior Member
- Number of posts : 691
Age : 55
Location : Eugene, Oregon
Registration date : 2009-08-16
Re: Stripped Bendmaster sustain block
The original blocks are pretty crappy but I've never had a problem to date. You maybe able to drill and tap a block from a Floyd copy or similar, but I have no experience of this. Otherwise, its repair what you have or wait for one to come up on ebay.
If the guitar is a keeper, you could improve the sustain greatly by having a replacement block made in a denser material such as brass. If you have a friendly engineering job shop, I cant see this being much of chore for them. I've seen brass replacement blocks for Floyd's being hawked around ebay and the internet at silly prices.
If the guitar is a keeper, you could improve the sustain greatly by having a replacement block made in a denser material such as brass. If you have a friendly engineering job shop, I cant see this being much of chore for them. I've seen brass replacement blocks for Floyd's being hawked around ebay and the internet at silly prices.
Steve777- Senior Member
- Number of posts : 356
Age : 67
Location : Coventry, UK
Registration date : 2008-10-14
Re: Stripped Bendmaster sustain block
Nope; not standard - I wouldn't think! - but there's not that much to a sustain block so have a crack at making yourself out of brass, mate; could be a bit of fun!! Yeah, as Steve said, waiting for a BD on the auction sites is another option, or re-drilling and retapping your one with Steves' patented stringlock technique could be runner as well...
corsair- Senior Member
- Number of posts : 6330
Age : 65
Location : Mount Hunter, NSW, Australia
Registration date : 2008-04-08
Re: Stripped Bendmaster sustain block
That was my first thought. Assuming you don't want to make a new one, a threaded insert might be the simplest solution.corsair wrote:...or re-drilling and retapping your one with Steves' patented stringlock technique could be runner as well...
_________________
"A little song. A little dance. A little seltzer down your pants." -Chuckles the Clown
![Bendmaster - Stripped Bendmaster sustain block Guitar10](https://i.servimg.com/u/f62/19/59/66/02/guitar10.gif)
GUITARS : https://legend.barryeames.com
MUSIC/PIX/VIDEOS: https://getback.barryeames.com (including Spectrum ST)
Re: Stripped Bendmaster sustain block
Barry wrote:That was my first thought. Assuming you don't want to make a new one, a threaded insert might be the simplest solution.corsair wrote:...or re-drilling and retapping your one with Steves' patented stringlock technique could be runner as well...
Great idea! Dont' know why i didn't think of that. Thanks, i'll give it a shot. I've done something similar to this in carpentry but not on a guitar, hope it works.
hobster- Senior Member
- Number of posts : 691
Age : 55
Location : Eugene, Oregon
Registration date : 2009-08-16
Re: Stripped Bendmaster sustain block
Just be a bit careful with the block as I suspect that it's not made of the most, well, substantial, of metals.... ![Bendmaster - Stripped Bendmaster sustain block Icon_smile](https://2img.net/i/fa/i/smiles/icon_smile.gif)
![Bendmaster - Stripped Bendmaster sustain block Icon_smile](https://2img.net/i/fa/i/smiles/icon_smile.gif)
corsair- Senior Member
- Number of posts : 6330
Age : 65
Location : Mount Hunter, NSW, Australia
Registration date : 2008-04-08
Re: Stripped Bendmaster sustain block
Yeah, with all these old guitar parts...slow and easy does it eh? Don't go all 'Rambo' with a high speed drill press! ![tongue](https://2img.net/i/fa/i/smiles/icon_tongue.png)
![tongue](https://2img.net/i/fa/i/smiles/icon_tongue.png)
_________________
"A little song. A little dance. A little seltzer down your pants." -Chuckles the Clown
![Bendmaster - Stripped Bendmaster sustain block Guitar10](https://i.servimg.com/u/f62/19/59/66/02/guitar10.gif)
GUITARS : https://legend.barryeames.com
MUSIC/PIX/VIDEOS: https://getback.barryeames.com (including Spectrum ST)
Re: Stripped Bendmaster sustain block
I cant see that the metal used for the string locks is any different than the trem block. Well, it worked for me !! Using a self cutting threaded insert only requires you to drill out the current hole to slightly smaller size than the insert. Then just wind it.
All details are on the Tappex site or go Korb-Konus. As I said, K-K have distributors all over the world.
I still beieve that a denser material such as brass would benefit sustain greatly.
All details are on the Tappex site or go Korb-Konus. As I said, K-K have distributors all over the world.
I still beieve that a denser material such as brass would benefit sustain greatly.
Steve777- Senior Member
- Number of posts : 356
Age : 67
Location : Coventry, UK
Registration date : 2008-10-14
Re: Stripped Bendmaster sustain block
Just made a call to Metal Supermarkets here in Coventry. they do have a website and seem to be owned by an American company. Lots of sizes available. For the trem block, I can buy flat brass bar in in the size required and they will sell you the amount you need ... Well, they will here in the UK! I might have a go myself, Cant be that difficult.
The trem block ( de Luxe ) in my Genesis II measures 1 3/4 inch, by 2 1/2 inch, by 3/8. I think that the trem block could be increased to 1/2 inch without diificulty apart from creating 6 channels to allow access for the strings
Interestingly, they also sell brass round bar and can put me in touch with small engineering companies to turn it into ..... knobs. Not rocket science !
The trem block ( de Luxe ) in my Genesis II measures 1 3/4 inch, by 2 1/2 inch, by 3/8. I think that the trem block could be increased to 1/2 inch without diificulty apart from creating 6 channels to allow access for the strings
Interestingly, they also sell brass round bar and can put me in touch with small engineering companies to turn it into ..... knobs. Not rocket science !
Steve777- Senior Member
- Number of posts : 356
Age : 67
Location : Coventry, UK
Registration date : 2008-10-14
Re: Stripped Bendmaster sustain block
How about helicoil?
colt933- Senior Member
- Number of posts : 583
Registration date : 2008-04-08
Re: Stripped Bendmaster sustain block
Jeez, he just wants to play it, not fly the bugger! ![clown](https://2img.net/i/fa/i/smiles/icon_clown.png)
![clown](https://2img.net/i/fa/i/smiles/icon_clown.png)
_________________
"A little song. A little dance. A little seltzer down your pants." -Chuckles the Clown
![Bendmaster - Stripped Bendmaster sustain block Guitar10](https://i.servimg.com/u/f62/19/59/66/02/guitar10.gif)
GUITARS : https://legend.barryeames.com
MUSIC/PIX/VIDEOS: https://getback.barryeames.com (including Spectrum ST)
Re: Stripped Bendmaster sustain block
Barry wrote:Yeah, with all these old guitar parts...slow and easy does it eh? Don't go all 'Rambo' with a high speed drill press!
![Bendmaster - Stripped Bendmaster sustain block Lol](https://2img.net/i/fa/i/smiles/lol.gif)
I know buddy, these are my babies. Actually i thought about busting out the sawzall!
hobster- Senior Member
- Number of posts : 691
Age : 55
Location : Eugene, Oregon
Registration date : 2009-08-16
![-](https://2img.net/i/empty.gif)
» Bendmaster Locking Nut Stripped
» Bendmaster BIG block
» Bendmaster FT
» Sustain block....
» Possible FT bridge replacement??
» Bendmaster BIG block
» Bendmaster FT
» Sustain block....
» Possible FT bridge replacement??
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum