1981 Paduak 1 bridge saddle – Can you help?
3 posters
Page 1 of 1
1981 Paduak 1 bridge saddle – Can you help?
I'm looking for a bridge saddle for a 1981 Paduak 1. It was only fitted to this model in this year and appears to be like six in line Telecaster style (see image below).
I can get an aftermarket Tele bridge with saddles but I am not sure the brass will be the same – at least colour match – so I thought I'd try here first in case anyone has one floating around.
All help gratefully received.
![saddle - 1981 Paduak 1 bridge saddle – Can you help? Paduak-ver1-bridge-string-slots](https://i0.wp.com/www.westoneguitars.net/wp-content/uploads/2011/04/paduak-ver1-bridge-string-slots.jpg)
I can get an aftermarket Tele bridge with saddles but I am not sure the brass will be the same – at least colour match – so I thought I'd try here first in case anyone has one floating around.
All help gratefully received.
![saddle - 1981 Paduak 1 bridge saddle – Can you help? Paduak-ver1-bridge-string-slots](https://i0.wp.com/www.westoneguitars.net/wp-content/uploads/2011/04/paduak-ver1-bridge-string-slots.jpg)
psafloyd- Westone Nut
- Number of posts : 38
Location : London
Registration date : 2016-06-07
psafloyd likes this post
Re: 1981 Paduak 1 bridge saddle – Can you help?
Ah yes, the barrel saddle bridge. For the most part a colossal design error by Uncle Mats (confirmed by Tom Presley).
This approach worked well on a 4 string bass but was pretty much a disaster when ported to a 6 string guitar. It was used on early Westone Thunders and Vantage Avengers and quickly dropped.
The design forces the strings through a tortured path around the intonation screws and over the barrels, often sitting on the height adjustment set screws instead of the brass!
And because the barrels need to be wider than a standard saddle in order to accommodate the screws the strings are pushed wider and the E strings do not sit over the pickup poles. I can see evidence of that in your picture
This also causes them to track too close to the fret board edge.
In the case of one of my guitars the treble E would fall off the board completely.
Finally, the length of the intonation screws makes the assembly a bit unstable, not at all what you want in a bridge.
I understand the urge to maintain originality but honestly, I would take this opportunity to replace the saddles or even the entire bridge with something more accurate.
This approach worked well on a 4 string bass but was pretty much a disaster when ported to a 6 string guitar. It was used on early Westone Thunders and Vantage Avengers and quickly dropped.
The design forces the strings through a tortured path around the intonation screws and over the barrels, often sitting on the height adjustment set screws instead of the brass!
And because the barrels need to be wider than a standard saddle in order to accommodate the screws the strings are pushed wider and the E strings do not sit over the pickup poles. I can see evidence of that in your picture
This also causes them to track too close to the fret board edge.
In the case of one of my guitars the treble E would fall off the board completely.
Finally, the length of the intonation screws makes the assembly a bit unstable, not at all what you want in a bridge.
I understand the urge to maintain originality but honestly, I would take this opportunity to replace the saddles or even the entire bridge with something more accurate.
_________________
"A little song. A little dance. A little seltzer down your pants." -Chuckles the Clown
![saddle - 1981 Paduak 1 bridge saddle – Can you help? Guitar10](https://i.servimg.com/u/f62/19/59/66/02/guitar10.gif)
GUITARS : https://legend.barryeames.com
MUSIC/PIX/VIDEOS: https://getback.barryeames.com (including Spectrum ST)
psafloyd likes this post
Re: 1981 Paduak 1 bridge saddle – Can you help?
That photo is one of mine.
That particular style bridge works fine. Plenty of down force from where the strings hook up.
It's 'F' spaced it's the pickup that isn't.
The similar bridge that hooks the strings in the upright bit at the back is junk.
What happened to your original saddle??
That particular style bridge works fine. Plenty of down force from where the strings hook up.
It's 'F' spaced it's the pickup that isn't.
The similar bridge that hooks the strings in the upright bit at the back is junk.
What happened to your original saddle??
psafloyd likes this post
Re: 1981 Paduak 1 bridge saddle – Can you help?
Your right Barry the D string is out of the slot.
Probably because I'd just restrung it but in practice it is absolutely fine.
Probably because I'd just restrung it but in practice it is absolutely fine.
Re: 1981 Paduak 1 bridge saddle – Can you help?
I acquired the Paduak for not very much money a couple of years back and it was missing the saddle, then.Westbone wrote:That photo is one of mine.
That particular style bridge works fine. Plenty of down force from where the strings hook up.
It's 'F' spaced it's the pickup that isn't.
The similar bridge that hooks the strings in the upright bit at the back is junk.
What happened to your original saddle??
Other distractions have occupied the interim, but this one is in quite nice nick – better than my other one without any fingerboard wear – and I'd like to get it dusted off and complete.
Any ideas about an original replacement, or will a new set do, do you think?
psafloyd- Westone Nut
- Number of posts : 38
Location : London
Registration date : 2016-06-07
Re: 1981 Paduak 1 bridge saddle – Can you help?
Ha! I didn't notice it was your pic Damian!
Yeah the string thru version is likely more stable but I still don't like the awkward way the string has to bend around the screws. It is just an unnecessarily clumsy design IMHO.
Yup, the top loader version is total rubbish! Got rid of 3 of 'em for the reasons mentioned above.
![Razz](https://2img.net/i/fa/i/smiles/icon_razz.gif)
Yeah the string thru version is likely more stable but I still don't like the awkward way the string has to bend around the screws. It is just an unnecessarily clumsy design IMHO.
Yup, the top loader version is total rubbish! Got rid of 3 of 'em for the reasons mentioned above.
_________________
"A little song. A little dance. A little seltzer down your pants." -Chuckles the Clown
![saddle - 1981 Paduak 1 bridge saddle – Can you help? Guitar10](https://i.servimg.com/u/f62/19/59/66/02/guitar10.gif)
GUITARS : https://legend.barryeames.com
MUSIC/PIX/VIDEOS: https://getback.barryeames.com (including Spectrum ST)
psafloyd likes this post
Re: 1981 Paduak 1 bridge saddle – Can you help?
That version is not a string through. Just hooks up in the bridge plate.Barry wrote:
Yeah the string thru version is likely more stable but I still don't like the awkward way the string has to bend around the screws. It is just an unnecessarily clumsy design IMHO.
Yup, the top loader version is total rubbish! Got rid of 3 of 'em for the reasons mentioned above.
Does go around the springs a little bit but not a problem. Seriously!....
![Smile](https://2img.net/i/fa/i/smiles/icon_smile.gif)
![Cool](https://2img.net/i/fa/i/smiles/icon_cool.gif)
Re: 1981 Paduak 1 bridge saddle – Can you help?
Ah right. Still, it's a much more solid connection eh?Westbone wrote:That version is not a string through. Just hooks up in the bridge plate.
Does go around the springs a little bit but not a problem. Seriously!....![]()
_________________
"A little song. A little dance. A little seltzer down your pants." -Chuckles the Clown
![saddle - 1981 Paduak 1 bridge saddle – Can you help? Guitar10](https://i.servimg.com/u/f62/19/59/66/02/guitar10.gif)
GUITARS : https://legend.barryeames.com
MUSIC/PIX/VIDEOS: https://getback.barryeames.com (including Spectrum ST)
Re: 1981 Paduak 1 bridge saddle – Can you help?
Solid, yes... ![Very Happy](https://2img.net/i/fa/i/smiles/icon_biggrin.png)
The hook up in the rear upright is junk....![Evil or Very Mad](https://2img.net/i/fa/i/smiles/icon_evil.gif)
![Very Happy](https://2img.net/i/fa/i/smiles/icon_biggrin.png)
The hook up in the rear upright is junk....
![Evil or Very Mad](https://2img.net/i/fa/i/smiles/icon_evil.gif)
Re: 1981 Paduak 1 bridge saddle – Can you help?
Hey, sorry psafloyd, we got off on a side chat there.
Can you offer any advice to our poster's question about saddle replacement Damian?
![tongue](https://2img.net/i/fa/i/smiles/icon_tongue.png)
Can you offer any advice to our poster's question about saddle replacement Damian?
_________________
"A little song. A little dance. A little seltzer down your pants." -Chuckles the Clown
![saddle - 1981 Paduak 1 bridge saddle – Can you help? Guitar10](https://i.servimg.com/u/f62/19/59/66/02/guitar10.gif)
GUITARS : https://legend.barryeames.com
MUSIC/PIX/VIDEOS: https://getback.barryeames.com (including Spectrum ST)
psafloyd likes this post
Re: 1981 Paduak 1 bridge saddle – Can you help?
Barry wrote:Hey, sorry psafloyd, we got off on a side chat there.![]()
Can you offer any advice to our poster's question about saddle replacement Damian?
No problem. All interesting stuff.
psafloyd- Westone Nut
- Number of posts : 38
Location : London
Registration date : 2016-06-07
Re: 1981 Paduak 1 bridge saddle – Can you help?
I don't have any spares for those bridges.
Wouldn't be hard to make one though.
Didn't you take your bridge off due to those saddles Barry??
Wouldn't be hard to make one though.
Didn't you take your bridge off due to those saddles Barry??
Re: 1981 Paduak 1 bridge saddle – Can you help?
Westbone wrote:I don't have any spares for those bridges.
Wouldn't be hard to make one though.
Didn't you take your bridge off due to those saddles Barry??
Are they a different size from the Tele style ones? I think I may end up trying one.
psafloyd- Westone Nut
- Number of posts : 38
Location : London
Registration date : 2016-06-07
Re: 1981 Paduak 1 bridge saddle – Can you help?
No idea off hand.
Have a measure up.
Have a measure up.
psafloyd likes this post
Re: 1981 Paduak 1 bridge saddle – Can you help?
I did, and sent one assembly to a member looking to restore something to original, despite my caution that it would likely end in tears.Westbone wrote:...
Didn't you take your bridge off due to those saddles Barry??
It did!
He ended up not using it.
I have the other 2(?) around somewhere. I know I didn't dump them in case the next owner wanted the original part if/when I sell.
But bugger it, I'm guessing yes, but do you know if the saddles are identical?
I should pack up all the saddles and send them to you Damian and perhaps you can help out our friend here?
_________________
"A little song. A little dance. A little seltzer down your pants." -Chuckles the Clown
![saddle - 1981 Paduak 1 bridge saddle – Can you help? Guitar10](https://i.servimg.com/u/f62/19/59/66/02/guitar10.gif)
GUITARS : https://legend.barryeames.com
MUSIC/PIX/VIDEOS: https://getback.barryeames.com (including Spectrum ST)
psafloyd likes this post
Re: 1981 Paduak 1 bridge saddle – Can you help?
Barry wrote:
I should pack up all the saddles and send them to you Damian and perhaps you can help out our friend here?
Why not have a measure up with psafloyd and take it from there?
psafloyd likes this post
Re: 1981 Paduak 1 bridge saddle – Can you help?
Westbone wrote:Barry wrote:
I should pack up all the saddles and send them to you Damian and perhaps you can help out our friend here?
Why not have a measure up with psafloyd and take it from there?
I'll get the calipers out and give it a measure later today.
Thanks for the help, gents.
psafloyd- Westone Nut
- Number of posts : 38
Location : London
Registration date : 2016-06-07
Re: 1981 Paduak 1 bridge saddle – Can you help?
I just thought you'd like them for your 'magic box'. But if not I'll look after it.Westbone wrote:Barry wrote:
I should pack up all the saddles and send them to you Damian and perhaps you can help out our friend here?
Why not have a measure up with psafloyd and take it from there?
_________________
"A little song. A little dance. A little seltzer down your pants." -Chuckles the Clown
![saddle - 1981 Paduak 1 bridge saddle – Can you help? Guitar10](https://i.servimg.com/u/f62/19/59/66/02/guitar10.gif)
GUITARS : https://legend.barryeames.com
MUSIC/PIX/VIDEOS: https://getback.barryeames.com (including Spectrum ST)
Re: 1981 Paduak 1 bridge saddle – Can you help?
_________________
"A little song. A little dance. A little seltzer down your pants." -Chuckles the Clown
![saddle - 1981 Paduak 1 bridge saddle – Can you help? Guitar10](https://i.servimg.com/u/f62/19/59/66/02/guitar10.gif)
GUITARS : https://legend.barryeames.com
MUSIC/PIX/VIDEOS: https://getback.barryeames.com (including Spectrum ST)
Re: 1981 Paduak 1 bridge saddle – Can you help?
![Face Palm](/users/2514/25/10/13/smiles/2604600381.gif)
Some days it don't pay to get outa bed, ya know?
![tongue](https://2img.net/i/fa/i/smiles/icon_tongue.png)
_________________
"A little song. A little dance. A little seltzer down your pants." -Chuckles the Clown
![saddle - 1981 Paduak 1 bridge saddle – Can you help? Guitar10](https://i.servimg.com/u/f62/19/59/66/02/guitar10.gif)
GUITARS : https://legend.barryeames.com
MUSIC/PIX/VIDEOS: https://getback.barryeames.com (including Spectrum ST)
Re: 1981 Paduak 1 bridge saddle – Can you help?
Thank you Barry but I'm retiring from guitars slowly but surely.....Barry wrote:I just thought you'd like them for your 'magic box'. But if not I'll look after it.
![Cool](https://2img.net/i/fa/i/smiles/icon_cool.gif)
psafloyd likes this post
Re: 1981 Paduak 1 bridge saddle – Can you help?
I'd like to get out of London and head east.Westbone wrote:Thank you Barry but I'm retiring from guitars slowly but surely.....Barry wrote:I just thought you'd like them for your 'magic box'. But if not I'll look after it.Have other things that need doing. Like the house as we intend to move asap. Must get out of London!
psafloyd- Westone Nut
- Number of posts : 38
Location : London
Registration date : 2016-06-07
Re: 1981 Paduak 1 bridge saddle – Can you help?
psafloyd wrote:Westbone wrote:
Why not have a measure up with psafloyd and take it from there?
I'll get the calipers out and give it a measure later today.
Thanks for the help, gents.
Saddles are much as you have kindly shared below, Barry. My measurements came out at 11mm wide by 8mm deep on a 41mm screw.
They do seem to be very similar to a Tele style bridge I have seen on Amazon (see last pic).
psafloyd- Westone Nut
- Number of posts : 38
Location : London
Registration date : 2016-06-07
Re: 1981 Paduak 1 bridge saddle – Can you help?
Sorry to hear that Damian. I hope it's not a forced decision.Westbone wrote:Thank you Barry but I'm retiring from guitars slowly but surely.....
Your expertise will be a loss to the guitar world and Westone players in particular.
But I do hope you'll still hang around here to keep us on the straight and narrow.
_________________
"A little song. A little dance. A little seltzer down your pants." -Chuckles the Clown
![saddle - 1981 Paduak 1 bridge saddle – Can you help? Guitar10](https://i.servimg.com/u/f62/19/59/66/02/guitar10.gif)
GUITARS : https://legend.barryeames.com
MUSIC/PIX/VIDEOS: https://getback.barryeames.com (including Spectrum ST)
Re: 1981 Paduak 1 bridge saddle – Can you help?
psafloyd wrote:
Saddles are much as you have kindly shared below, Barry. My measurements came out at 11mm wide by 8mm deep on a 41mm screw.
They do seem to be very similar to a Tele style bridge I have seen on Amazon (see last pic).
I didn't measure my screw dia but the length is just over 36mm.
Your 11mm seems awfully wide though, the Tele saddle you linked to is 10.8mm
Depending on how picky you are, you could probably use the Tele saddle regardless. You might want to shuffle its position in order to minimize any pole alignment issues especially over the treble E string.
Send me a PM if you're interested in my saddle.
_________________
"A little song. A little dance. A little seltzer down your pants." -Chuckles the Clown
![saddle - 1981 Paduak 1 bridge saddle – Can you help? Guitar10](https://i.servimg.com/u/f62/19/59/66/02/guitar10.gif)
GUITARS : https://legend.barryeames.com
MUSIC/PIX/VIDEOS: https://getback.barryeames.com (including Spectrum ST)
Re: 1981 Paduak 1 bridge saddle – Can you help?
Barry wrote:psafloyd wrote:
Saddles are much as you have kindly shared below, Barry. My measurements came out at 11mm wide by 8mm deep on a 41mm screw.
They do seem to be very similar to a Tele style bridge I have seen on Amazon (see last pic).
I didn't measure my screw dia but the length is just over 36mm.
Your 11mm seems awfully wide though, the Tele saddle you linked to is 10.8mm
Depending on how picky you are, you could probably use the Tele saddle regardless. You might want to shuffle its position in order to minimize any pole alignment issues especially over the treble E string.
Send me a PM if you're interested in my saddle.
0.2mm on a set of cheap calipers is nothing. But it could be they are wider.
I'd be interested in your saddle for the sake of originality, so thanks, I'll PM you.
psafloyd- Westone Nut
- Number of posts : 38
Location : London
Registration date : 2016-06-07
Re: 1981 Paduak 1 bridge saddle – Can you help?
Yup. Like the lady said, "Size isn't everything"0.2mm on a set of cheap calipers is nothing.
![Rolling Eyes](https://2img.net/i/fa/i/smiles/icon_rolleyes.gif)
Got your message. Will mail it when I get your address.
_________________
"A little song. A little dance. A little seltzer down your pants." -Chuckles the Clown
![saddle - 1981 Paduak 1 bridge saddle – Can you help? Guitar10](https://i.servimg.com/u/f62/19/59/66/02/guitar10.gif)
GUITARS : https://legend.barryeames.com
MUSIC/PIX/VIDEOS: https://getback.barryeames.com (including Spectrum ST)
Re: 1981 Paduak 1 bridge saddle – Can you help?
One of Uncle Mats' famous barrel saddles is on its way as of today Pádraig.
Fingers crossed it makes it. Small envelope. Padded. No customs declaration
Maybe it'll sneak by as a birthday card.![tongue](https://2img.net/i/fa/i/smiles/icon_tongue.png)
Fingers crossed it makes it. Small envelope. Padded. No customs declaration
Maybe it'll sneak by as a birthday card.
![tongue](https://2img.net/i/fa/i/smiles/icon_tongue.png)
_________________
"A little song. A little dance. A little seltzer down your pants." -Chuckles the Clown
![saddle - 1981 Paduak 1 bridge saddle – Can you help? Guitar10](https://i.servimg.com/u/f62/19/59/66/02/guitar10.gif)
GUITARS : https://legend.barryeames.com
MUSIC/PIX/VIDEOS: https://getback.barryeames.com (including Spectrum ST)
![-](https://2img.net/i/empty.gif)
» Paduak I / II
» WANTED – Paduak 1 early bridge saddle
» Bridge Saddles or Bridge on Westone Thunder I-A
» New Bridge & Neck on Westone Spectrum DX - Advice Needed on Neck and Bridge Replacement
» Concord I -1981 (CAN)
» WANTED – Paduak 1 early bridge saddle
» Bridge Saddles or Bridge on Westone Thunder I-A
» New Bridge & Neck on Westone Spectrum DX - Advice Needed on Neck and Bridge Replacement
» Concord I -1981 (CAN)
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|