Parts Needed for Electra Phoneix X110

by Guest Sat Oct 07, 2017 8:00 pm

Hi I'm looking for a Control Cavity Cover for a Phoenix Electra X110
Also a Tremolo Cover, I got an all Natural X110 and these are missing.
One other Piece would be an Truss Rod Cover for the neck.

Thanks.

by **corsair** Sun Oct 08, 2017 4:17 am

Mate, make cardboard templates of the covers and whip along to your friendly plastics shop and ask them to make them for you!

In here someplace is a template for a Spectrum backplate; have a scratch around for it.

The TRC; are the Phoenix and Spectrum ones the same??

by Guest Sun Oct 08, 2017 4:45 am

Yes TRC Same

Westone Spectrum ST,

Westone Spectrum MX (X139)

Westone Spectrum III
Westone Spectrum LX

Westone Spectrum SX

All use same covers Control,Tremolo & Neck Truss Rod....
As the Electra Phoenix X110s

Thunder I Control Plate Only....

by Guest Sun Oct 08, 2017 5:15 am

The X110 NA Electra Phoneix I'm Restoring.

electra - Parts Needed for Electra Phoneix X110 S-l16012

electra - Parts Needed for Electra Phoneix X110 S-l16013

electra - Parts Needed for Electra Phoneix X110 Zxzds11

by Westbone Sun Oct 08, 2017 7:48 am

This any good for you? Off an MX.

electra - Parts Needed for Electra Phoneix X110 Dscf9913

electra - Parts Needed for Electra Phoneix X110 Dscf9914

by Guest Sun Oct 08, 2017 10:17 am

That should work fine yes.

by **Barry** Sun Oct 08, 2017 4:11 pm

It looks like you've already made your own covers. Why not simply make them again out of some inexpensive black plastic? Or maybe spray paint the ones you have?

The inside of the control cover can be covered using aluminum tape. Easy enough.

by Guest Sun Oct 08, 2017 7:08 pm

I didn't make that's Westbone's yes; Westbone that would work fine...

by Guest Sun Oct 08, 2017 7:12 pm

corsair wrote:Mate, make cardboard templates of the covers and whip along to your friendly plastics shop and ask them to make them for you!

In here someplace is a template for a Spectrum backplate; have a scratch around for it.

The TRC; are the Phoenix and Spectrum ones the same??

Truss Rod Cover same yes if you have extra one.

by **corsair** Sun Oct 08, 2017 9:15 pm

I've got spare Vantage Avenger ones that I made; I still have the stock that I used to make them - I shall have a go at making a Spectrum one....

by Westbone Sun Oct 08, 2017 9:32 pm

Might have a trem cover also. Will check for it tomorrow.

by Guest Sun Oct 08, 2017 10:46 pm

Thank you all very much. These are part of my Therapy using my hand rehab from Stroke I had in Feb... Can't thank you all enough.

by **Barry** Mon Oct 09, 2017 1:39 pm

Best wishes with your rehab (from one stroke survivor to another).
It will get better! Smile

by Guest Mon Oct 09, 2017 2:34 pm

Barry wrote:Best wishes with your rehab (from one stroke survivor to another).
It will get better!

Thanks it's been rough, also had Cardiac Arrest on June 17th from med for treatment. How ever lost 70lbs and beat full blown Diabetes....

by Westbone Mon Oct 09, 2017 3:21 pm

Found this.
electra - Parts Needed for Electra Phoneix X110 Dscf0010

by Guest Mon Oct 09, 2017 4:36 pm

Awesome can really use it and the other Cover Westbone. Thank you so much... Let me know in PM how I can work out arrangement for them. Have a Wonderful and Blessed Evening. cheers

by Guest Mon Oct 09, 2017 4:49 pm

Corsair the Truss Covers all look identical.

by Sponsored content

Parts Needed for Electra Phoneix X110