Dynasty Project Wiring Help Please

Go down

wiring - Dynasty Project Wiring Help Please Empty Dynasty Project Wiring Help Please

Post by Sycosyd on Mon Sep 17, 2018 3:25 pm

Hello Guys, Well, Its here.  

Along with the PU Surrounds and a Single coil.  BUT What needs soldering where?

Has anyone got any pictures or wiring diagram to help me I'm a novice to such wizardry?

Cheers.
Sycosyd
Sycosyd
Westone Nut

Number of posts : 50
Registration date : 2018-07-30

Back to top Go down

wiring - Dynasty Project Wiring Help Please Empty Re: Dynasty Project Wiring Help Please

Post by Barry on Mon Sep 17, 2018 4:01 pm

Dynasty Wiring diagram

_________________
"A little song. A little dance. A little seltzer down your pants." -Chuckles the Clown
wiring - Dynasty Project Wiring Help Please Guitar10
GUITARS : https://legend.barryeames.com/guitars.html
MUSIC/PIX/VIDEOS: https://getback.barryeames.com (including Spectrum ST)
Barry
Barry
Hero, Legend, and all round good guy

Number of posts : 7552
Age : 74
Location : Port Weller, St. Catharines, Canada
Registration date : 2009-05-01

https://www.barryeames.com

Back to top Go down

wiring - Dynasty Project Wiring Help Please Empty Re: Dynasty Project Wiring Help Please

Post by corsair on Mon Sep 17, 2018 4:04 pm

Pix, or it didn't happen....

_________________
".... and on the eighth day, God created New Zealanders.

Because even the Australians need heroes"
corsair
corsair
Administrator

Number of posts : 6035
Age : 60
Location : Takura, Australia.
Registration date : 2008-04-08

Back to top Go down

wiring - Dynasty Project Wiring Help Please Empty Re: Dynasty Project Wiring Help Please

Post by Sycosyd on Mon Sep 17, 2018 6:20 pm

Proof he says precious!wiring - Dynasty Project Wiring Help Please Img_2010
wiring - Dynasty Project Wiring Help Please Img_2012
wiring - Dynasty Project Wiring Help Please Img_2011
Sycosyd
Sycosyd
Westone Nut

Number of posts : 50
Registration date : 2018-07-30

Back to top Go down

wiring - Dynasty Project Wiring Help Please Empty Re: Dynasty Project Wiring Help Please

Post by corsair on Mon Sep 17, 2018 6:51 pm

Laughing 
Ooh; looks alright, too, Syd! Are the points munted or OK? Pickups will be on their way today, mate...

With the soldering, just take it slowly and check twice before attaching anything; if I can do it - and I'm the original Blind Freddie - , my friend, then you can, too!

What I do find helpful is to make a cardboard template of the control cavity with the holes for the hardware... put the hardware in the holes - if you have to use the wee nuts to hold 'em there, then that's OK -  then turn the cardboard upside down and work on the soldering that way; makes it a damn sight easier, though there are still wires you have to do in situ like the bridge earth and the output jack, though even that's not too bad as it's mounted on a plastic rectangle.
Don't try to make the wires too short - give yourself plenty to work with; wire's cheap as chips!

_________________
".... and on the eighth day, God created New Zealanders.

Because even the Australians need heroes"
corsair
corsair
Administrator

Number of posts : 6035
Age : 60
Location : Takura, Australia.
Registration date : 2008-04-08

Back to top Go down

wiring - Dynasty Project Wiring Help Please Empty Re: Dynasty Project Wiring Help Please

Post by Sycosyd on Sat Oct 06, 2018 2:36 pm

Having a bit of an issue with screws for one of the 45's, One set are about the right dia, but only about 15mm long, and another set are about the right length but woefully small. any idea what size I'd need if I try and get some from a hardwear shop?
Sycosyd
Sycosyd
Westone Nut

Number of posts : 50
Registration date : 2018-07-30

Back to top Go down

wiring - Dynasty Project Wiring Help Please Empty Re: Dynasty Project Wiring Help Please

Post by corsair on Sat Oct 06, 2018 4:47 pm

Which screws, Syd? The mounting screws or height adjustment screws?

_________________
".... and on the eighth day, God created New Zealanders.

Because even the Australians need heroes"
corsair
corsair
Administrator

Number of posts : 6035
Age : 60
Location : Takura, Australia.
Registration date : 2008-04-08

Back to top Go down

wiring - Dynasty Project Wiring Help Please Empty Re: Dynasty Project Wiring Help Please

Post by Sycosyd on Sat Oct 06, 2018 11:22 pm

corsair wrote:Which screws, Syd? The mounting screws or height adjustment screws?
Height adjustment ones pal.  Hoping I can get x size machine screws to do the job as 3 different packs from Allparts didn't didn't do the job
Sycosyd
Sycosyd
Westone Nut

Number of posts : 50
Registration date : 2018-07-30

Back to top Go down

wiring - Dynasty Project Wiring Help Please Empty Re: Dynasty Project Wiring Help Please

Post by Westbone on Sun Oct 07, 2018 4:43 am

Height screws are 2.5 mm

https://www.ebay.co.uk/itm/8-Pcs-M2-5x32MM-Electric-Guitar-Humbucker-Pickups-Adjust-Height-Screw-and-S-B8N6/223086804295?epid=15022159227&hash=item33f1027d47Ⓜmaxzaore9pmx6yG00TsiJdg
Westbone
Westbone
Financial supporter

Number of posts : 5565
Location : Redbridge
Registration date : 2008-12-28

http://www.chruler.com/

Back to top Go down

wiring - Dynasty Project Wiring Help Please Empty Re: Dynasty Project Wiring Help Please

Post by Sycosyd on Sun Oct 07, 2018 10:02 am

Thanks Westbone
Sycosyd
Sycosyd
Westone Nut

Number of posts : 50
Registration date : 2018-07-30

Back to top Go down

wiring - Dynasty Project Wiring Help Please Empty Re: Dynasty Project Wiring Help Please

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum