The · W e s t o n e · Forums
Would you like to react to this message? Create an account in a few clicks or log in to continue.

XA1330 Parts Wanted

3 posters

Go down

XA1330 - XA1330 Parts Wanted Empty XA1330 Parts Wanted

Post by JerseyJammer Thu Feb 05, 2015 9:32 pm

Looking for a 5 way switch, original Humbucker (I believe a magnaflux V), and the nut for the bandmaster deluxe that  the wammy bar screws into.   And if anyone has a wiring diagram for this guitar that would be awesome as well.
JerseyJammer
JerseyJammer
Registered Member

Number of posts : 3
Registration date : 2015-02-05

Back to top Go down

XA1330 - XA1330 Parts Wanted Empty Re: XA1330 Parts Wanted

Post by corsair Fri Feb 06, 2015 3:35 am

Are the 5 way switches not a standard type of item?? If it helps, most of the electronic gear was Switchmaster...

The pickups... I think the Magnaflux V was the MMK 45 so keep an eye out for one of those, probably a four wire one, I think.

That collar that the wang bar goes through? Good luck finding one of those; they're as rare as chickens lips! The bar doesn't actually screw into it, though; it screws into the sustain block. The collar is there as a support, i think.

This should be close enough to what you're after..

http://www.westoneguitars.net/fixme/wiring-diagrams/genesis-ii/
avatar
corsair
Senior Member

Number of posts : 6319
Age : 64
Location : Mount Hunter, NSW, Australia
Registration date : 2008-04-08

Back to top Go down

XA1330 - XA1330 Parts Wanted Empty Re: XA1330 Parts Wanted

Post by JerseyJammer Fri Feb 06, 2015 1:19 pm

Thanks Corsair !  The 5 way switch is not standard, I've looked all over the internet, the holes for mounting the switch are not the same width apart, seem to be unique for these guitars.
JerseyJammer
JerseyJammer
Registered Member

Number of posts : 3
Registration date : 2015-02-05

Back to top Go down

XA1330 - XA1330 Parts Wanted Empty Re: XA1330 Parts Wanted

Post by Westbone Fri Feb 06, 2015 2:23 pm

What are the hole centres in mm?
Everything on these is metric not inches.

Use one on these as a locking nut

http://www.ebay.co.uk/itm/ORIGINAL-KAHLER-STRING-LOCK-NUT-CHROME-FITS-7300-2300-JACKSON-USA-SAN-DIMAS-/231029534790?pt=LH_DefaultDomain_0&hash=item35ca6ef046
Westbone
Westbone
Financial supporter

Number of posts : 5917
Location : Redbridge
Registration date : 2008-12-28

http://www.chruler.com/

Back to top Go down

XA1330 - XA1330 Parts Wanted Empty Re: XA1330 Parts Wanted

Post by corsair Fri Feb 06, 2015 9:19 pm

oh, yeah.... if you want a good replcement for the collar arrangement for the wang bar; PM Westbone and ask him about his work around solution for it!! I have 2 of his replacements on my gear and they are very good indeed!
avatar
corsair
Senior Member

Number of posts : 6319
Age : 64
Location : Mount Hunter, NSW, Australia
Registration date : 2008-04-08

Back to top Go down

XA1330 - XA1330 Parts Wanted Empty Re: XA1330 Parts Wanted

Post by Westbone Sat Feb 07, 2015 2:06 pm

the one's you have john are for a FT type trem.

Yer mans after a 'bandmaster' trem collar.
I've a fix for those also.
Westbone
Westbone
Financial supporter

Number of posts : 5917
Location : Redbridge
Registration date : 2008-12-28

http://www.chruler.com/

Back to top Go down

XA1330 - XA1330 Parts Wanted Empty Re: XA1330 Parts Wanted

Post by corsair Sat Feb 07, 2015 4:52 pm

Face Palm

Yes, they are.
avatar
corsair
Senior Member

Number of posts : 6319
Age : 64
Location : Mount Hunter, NSW, Australia
Registration date : 2008-04-08

Back to top Go down

XA1330 - XA1330 Parts Wanted Empty Re: XA1330 Parts Wanted

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum